Leakiest streets in RM10
What this means
Across 19252 energy certificates in RM10, 11869 (61.7%) are rated band D or below. The average current rating is 62.8 out of 100, which the recommended improvements on those certificates would lift to about 79.2. The average estimated annual heating cost is £599, falling to about £431 after the recommended work – a saving of roughly £167 a year.
Every figure is computed across the certificates in this area – no individual property is identified or listed.
How RM10 compares
Set against the average across the 3,339,357 energy certificates in our dataset (average current rating 67.8, with 51.7% band D or below):
- Band D or below here is 61.7%, 10.0 points higher (leakier).
- The average current rating here is 62.8, 5.0 points below the wider-dataset average.
Indicative comparison against the certificates we hold, not an official national statistic. Check the official source for area statistics.
What the certificates say about the fabric
The most common construction descriptions recorded across these certificates. Percentages are of certificates where the field was recorded.
Walls
- Solid brick, as built, no insulation (assumed) – 47.5%
- Cavity wall, as built, no insulation (assumed) – 20.0%
- Cavity wall, filled cavity – 15.0%
Recorded as having no wall insulation: 70.0%.
Roofs
- Pitched, no insulation (assumed) – 20.0%
- (another dwelling above) – 15.0%
- Pitched, 50 mm loft insulation – 10.0%
Recorded as having no roof insulation: 22.5%.
Glazing
- Fully double glazed – 100.0%
Main heating
- Boiler and radiators, mains gas – 90.0%
- Room heaters, electric – 5.0%
- Electric storage heaters – 5.0%
Retrofit measures for this housing stock
Based on the construction recorded on the certificates here, these guides cover the measures that most often apply, with typical UK costs and savings cited to public sources.
- Cavity wall insulation cost
- Solid wall insulation cost
- Heat pump cost and the £7,500 grant
- Loft insulation cost
- How to improve an EPC rating
What insulation adds in RM10
See the average current-to-potential uplift and the estimated heating-cost saving for this area.
What insulation adds in RM10Keep exploring
Areas with similar leakiness
- Leakiest streets in N14 62% band D or below
- Leakiest streets in E6 62% band D or below
- Leakiest streets in KT9 62% band D or below
- Leakiest streets in SE9 62% band D or below
- Leakiest streets in E11 62% band D or below
- Leakiest streets in CR5 61% band D or below
- Leakiest streets in N10 62% band D or below
- Leakiest streets in CR2 62% band D or below