Leakiest streets in W10

43.3%

Band D or below

14611

Certificates

71.8

Average rating

£96

Avg potential saving / yr

What this means

Across 14611 energy certificates in W10, 6332 (43.3%) are rated band D or below. The average current rating is 71.8 out of 100, which the recommended improvements on those certificates would lift to about 78.3. The average estimated annual heating cost is £363, falling to about £267 after the recommended work – a saving of roughly £96 a year.

A B C D E F G

A 0.1% B 14.5% C 42.0% D 32.1% E 9.4% F 1.5% G 0.3%

Every figure is computed across the certificates in this area – no individual property is identified or listed.

How W10 compares

Set against the average across the 3,339,357 energy certificates in our dataset (average current rating 67.8, with 51.7% band D or below):

Band D or below here is 43.3%, 8.4 points lower (more efficient).
The average current rating here is 71.8, 4.0 points above the wider-dataset average.

Indicative comparison against the certificates we hold, not an official national statistic. Check the official source for area statistics.

What the certificates say about the fabric

The most common construction descriptions recorded across these certificates. Percentages are of certificates where the field was recorded.

Walls

Solid brick, as built, no insulation (assumed) – 35.8%
Cavity wall, as built, insulated (assumed) – 25.0%
System built, as built, insulated (assumed) – 12.5%

Recorded as having no wall insulation: 43.3%.

Roofs

(another dwelling above) – 54.2%
Flat, insulated (assumed) – 10.0%
Flat, no insulation (assumed) – 7.5%

Recorded as having no roof insulation: 12.5%.

Glazing

Fully double glazed – 81.8%
Single glazed – 10.4%
Some double glazing – 2.6%

Main heating

Boiler and radiators, mains gas – 53.3%
Electric storage heaters – 19.2%
Community scheme – 15.0%

Retrofit measures for this housing stock

Based on the construction recorded on the certificates here, these guides cover the measures that most often apply, with typical UK costs and savings cited to public sources.

All retrofit guides

What insulation adds in W10

See the average current-to-potential uplift and the estimated heating-cost saving for this area.